steps of how to make cement interlocking blocks by automatic brick making machinery

Here are the steps to make cement interlocking blocks using automatic brick making machinery:

1. Preparation: Start by gathering all the necessary materials and equipment. This includes cement, sand, water, and the automatic brick making machinery.

2. Mixing: In a mixing container or machine, combine the cement, sand, and water. The exact proportions may vary depending on the desired strength of the blocks, but a common ratio is 1 part cement to 4 parts sand. Gradually add water while mixing until you achieve a thick, consistent mixture.

3. Loading the machine: Load the mixture into the hopper of the automatic brick making machine. Make sure to follow the manufacturer's instructions for proper loading techniques and capacity limits.

4. Moulding: Activate the machine to begin the moulding process. The machine will automatically compress the mixture in a mould to form a brick shape. It will then release the formed brick onto a conveyor belt or pallet.

5. Curing: The freshly made bricks need to be cured to reach their full strength. You can leave them to air dry in a well-ventilated area for several days, or you can use a curing chamber if available. Either way, make sure the bricks are protected from direct sunlight and extreme weather conditions during the curing process.

6. Stacking and storage: Once the bricks have cured, they can be stacked and stored for future use. Make sure to stack them in a way that allows for proper air circulation and prevents damage.

7. Installation: To install the interlocking blocks, prepare the ground by leveling and compacting it. Place the blocks in the desired pattern, making sure the interlocking mechanisms align correctly. Depending on the design, you may need to use a rubber mallet to tap the blocks gently into place.

8. Finishing touches: Once the blocks are installed, clean any excess debris or cement residue. You can also apply a sealer or protective coating to enhance the durability and appearance of the blocks.

Remember to always follow safety guidelines, wear appropriate protective gear, and refer to the specific instructions provided by the automatic brick making machinery manufacturer for the best results.