Views: 0 Author: fuda block machine factory Publish Time: 2025-03-27 Origin: Site
Brick-making machines can utilize a variety of materials depending on the type of bricks being produced (e.g., clay, concrete, fly ash, or compressed earth blocks). Here are the most common materials used:
Natural Clay (primary material)
Sand (for texture and strength)
Water (for plasticity and molding)
Cement (binding agent)
Sand (fine aggregate)
Gravel/Crushed Stone (coarse aggregate)
Water (for hydration)
Admixtures (optional, for faster curing or water resistance)
Fly Ash (byproduct from coal plants)
Cement/Lime (as a binder)
Gypsum (for setting control)
Sand/Stone Dust (filler material)
Water
Soil (clay-rich or loamy)
Sand (to reduce shrinkage)
Cement/Lime (stabilizer, 5–10%)
Water
Soil + Cement (for stabilization)
Crushed Stone/Sand (for strength)
Water
Construction Waste (crushed concrete, bricks)
Plastic Waste (in some experimental bricks)
Industrial Byproducts (slag, quarry dust)
Local Availability (cost-effectiveness)
Strength Requirements (load-bearing vs. non-load-bearing)
Curing Method (sun-dried, kiln-fired, or cement-cured)
Environmental Impact (fly ash and recycled materials are sustainable)